perform®sterile concentrate PAA

Sterile liquid concentrate based on peracetic acid for disinfecting surfaces in cleanrooms.

Our Plus

  • fast, effective and sporicidal
  • sterile (filled aseptically) and microbial filtered (0.2 μm)
  • convenient single use bottle
  • colour and perfume free
  • residue free
  • efficacy tested according to European norms (EN) 

Fields of Application

Disinfection of surfaces and equipment/devices in cleanrooms. Especially for Grade A and B clean areas, according to:

  • EU Guidelines to Good Manufacturing Practice for medicinal products, Annex 1: Manufacture of sterile medicinal products; March 2009.
  • FDA Guidance for Industry: Sterile drug products produced by aseptic processing - current good manufacturing practice, U.S. Department of Health and Human Services; Food and Drug Administration; September 2004. 

Instructions for use

Prepare the working solution by filling water of an appropriate quality into a tub or bucket. Add the concentrate to the water and stir gently.

For example:
1 bottle (40 ml) for 4 L = 1 % solution.
Wipe the pre-cleaned surfaces until they are well wetted and observe required contact time.

Microbiological efficacy

EfficacyConcentrationContact time
bactericidal
EN1276, EN13697
0.25 % (2.5 ml/l)5 min.
yeasticidal
EN1650, EN13697
0.2 % (2 ml/l)15 min.
yeasticidal
EN1650, EN13697
0.3 % (3 ml/l)5 min.
fungicidal
EN1650, EN13697
2 % (20 ml/l)15 min.
fungicidal
EN1650, EN13697
3 % (30 ml/l)5 min.
virucidal against enveloped viruses
in accordance with DVV
0.5 % (5 ml/l)10 min.
sporicidal
EN13697
1 % (10 ml/l)5 min.

Product data

Composition:
100 g solution contains the following active substances: 6.2 g Peracetic acid.
Contains Hydrogen peroxide.



Chemical-physical data

Flash point:> 100 °C
Form:liquid
Colour:colourless
Density:1,123 g/cm3 / 20 °C
Viscosity, dynamic:1,47 mPa*s / 20 °C
pH:< 1 / 20 °C

Special advice

Use disinfectants safely. Always read the label and product information before use.
Professional use only. Read safety data sheet before use.
Good material compatibility with stainless steel, PTFE, PVDF, PEHD, PP, Viton, glass etc.
Contact with non-ferrous metals (brass, copper) should be avoided.
Recommended storage temperature: 5°C to 30°C.
Do not keep the container sealed. Store in upright position only. Dispose of the product as hazardous waste in compliance with local and national regulations. Provide sufficient air exchange and/or exhaust in work rooms.

IE: PCS No. 97201 

Information for order

ItemDelivery formItem no.
perform sterile conc PAA 20x40 ml FL1/Cartonon request

These products are not available in every country. For more information please contact our local subsidiary or distributor.

Environmental information

schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining our high quality standards.
EuroNorm

Privacy Policy

We use analysis methods (e. g. cookies) to measure how often our site is visited and how it is used.
We embed third-party content from other providers (e. g. videos) on our site. We have no influence on further data processing and any tracking by the third party provider.
In this context, we also use service providers in third countries outside the EU that do not have an adequate level of data protection, which harbors the following risks: Access by authorities without informing the data subject, no data subject rights, no legal remedies, loss of control.
With your settings you consent to the processes described above. You can revoke your consent with effect for the future. You can find more information in our privacy policy.