thermosept® PAA additive
Active oxygen based disinfection of flexible endoscopes in AER.
Our Plus
- effective against bacteria, fungi, viruses and spores (incl. Clostridium)
- good material compatibility
- short contact time
Downloads
Fields of Application
For chemothermal reprocessing of flexible endoscopes in endoscope washer/disinfectors.
Instructions for use
A typical cycle will be as follows:
- pre-rinsing (optional)
- cleaning with thermosept® ER, 5 ml/l
- intermediary rinse
- disinfection:
- dosage 1.0 % thermosept® PAA additive,, dosing while water inflow
- dosage 1.0 % thermosept® PAA base
- contact time 5 minutes at 37°C
- rinsing
- final rinsing
Product data
Composition of component base:
100 g solution contains the following active substances: 5 g peracetic acid, as well as hydrogen peroxide and acetic acid
Composition of component additive:
100 g solution contains the following active substances: potassium hydroxide, phosphate and corrosion inhibitor, surfactant.
Chemical-physical data
Form:liquid
Color:light yellow
Flash point:Not applicable
Density:ca. 1.2 g/cm3 / 20 °C
Viscosity, dynamic:No data available
pH:> 13 / 20 °C
Special advice
For all the related safety information please refer to the Safety Data Sheet. To request the Safety Data Sheet please E-mail: tech-uk@schuelke.com
The base and additive components have to be used in combination.
Store in original container at room temperature. Keep the container tightly closed. protect from heat and sunlight. thermosept® PAA is not suitable for instruments made of brass and copper nor chrome-plated instruments.
According to EN 17 664, the instrument manufacturers' instructions should be followed and, if necessary, the compatibility of the materials ensured before the application.
This is particularly valid when reprocessing older endoscopes. These should be strictiy tested for compatibility with peracetic acid.
The base and additive components have to be used in combination.
Store in original container at room temperature. Keep the container tightly closed. protect from heat and sunlight. thermosept® PAA is not suitable for instruments made of brass and copper nor chrome-plated instruments.
According to EN 17 664, the instrument manufacturers' instructions should be followed and, if necessary, the compatibility of the materials ensured before the application.
This is particularly valid when reprocessing older endoscopes. These should be strictiy tested for compatibility with peracetic acid.
Information for order
| Item | Delivery form | Item no. |
|---|---|---|
| thermosept PAA additive 5 l KA | 2/Carton | 125802 GTIN: 4032651258024 |
Environmental information
schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining our high quality standards.
Information
Please visit our website for an overview of all available literature/reports on all schulke products online at www.schuelke.com. For any queries you might have about the products and its use please call 0114 254 3500 or E-mail: mail.uk@schuelke.com.