Fields of Application
Instructions for use
To prepare the working solution, first add water (preferably hand-warm) to the tub or bucket, then sprinkle in and dissolve the product.
For example:
1 sachet (40 g) for 4 L = 1 % solution
Heavily contaminated surfaces are to be pre-cleaned. Ensure complete wetting. Contact time has to be considered. Rinse surfaces intended to be in direct contact with final products. To prevent the build-up of residue on treated surfaces, keep residual moisture on surfaces to a minimum after wiping. perform® classic concentrate OXY has excellent cleaning properties, therefore mixing it with cleaning boosters is not necessary. The composition of the active ingredient system in the active solution remains stable for one working day. If the active solution becomes very dirty, replace it earlier.
Product data
Composition:
100 g powder contains the following active substances: 45 g Pentapotassium bis(peroximonosulphate) bis(sulphate).
Labelling according to Regulation (EC) No. 648/2004: 5 - 15 % anionic surfactants, < 5 % non-ionic surfactants, < 5 % soap, < 5 % phosphonates, perfumes.
Chemical-physical data
Special advice
Use disinfectants safely. Always read the label and product information before use.
Do not store bags above room temperature. Wearing of protective gloves (e.g. made of Nitrile rubber) is recommended.
The active solution may bleach textile dyes that are highly sensitive.
Information for order
| Item | Delivery form | Item | GTIN |
|---|---|---|---|
| perform® classic concentrate OXY 250 x 40 g | 250 / carton(s) | 70003328 | 4032651983353 |