Fields of Application
Instructions for use
To prepare the working solution, first add water (max. 30 °C) to the tub or bucket, then sprinkle in perform® classic concentrate PEROXY and dissolve. For example: 1 sachet (40 g) to 4 liters of water = 1 % (10 g/l). Remove visible soiling beforehand. Wipe surfaces well to wet them and observe the reaction time. If necessary, rinse the surface in contact with the product. To reduce the formation of residues on treated surfaces, surfaces should only be left with minimal residual moisture after wiping. perform® classic concentrate PEROXY has good cleaning properties. Mixing with cleaning boosters is therefore not allowed. The prepared working solutions have a lifetime of max. 30 hours (at 20 °C) and 4 hours (at 40 °C) for guaranteed stability of the active ingredient. The working solution should be replaced earlier in case of heavy contamination.
Product data
100g contains: 49.5 g pentakalium bis (peroxymonosulfate) bis (sulfate).
Chemical-physical data
Colour: whiteFlash point: not applicable
Form: solid powder
pH value: ca. 3,0 / 20 g/l / 20 °C / in Wasser
Viscosity, dynamic: not applicable
Special advice
Use disinfectiants safely. Always read the label and product information before use. For professional use only.
The wearing of protective gloves (e.g. made of nitrile rubber) is recommended. Do not store bags above room temperature. The active solution may bleach textile dyes that are highly sensitive.
Information for order
| Item | Delivery form | Item | GTIN |
|---|---|---|---|
| perform® classic concentrate PEROXY 40 g | 60 / carton(s) | 70003666 | 4032651985371 |