mikrozid® universal liquid

Fields of Application

The product is suitable for disinfecting medical devices and other surfaces. Our versatile, rapid disinfectant is also suitable for disinfecting sensitive communication devices. Smartphones and tablets are among the most common hand contact surfaces. With mikrozid® universal liquid, these can be safely prepared without damaging the materials.

Microbiological efficacy

Efficacy	Concentration	Contact time
bactericidal EN13727 - dirty conditions	ready-to-use	15 sec.
bactericidal EN16615 - clean conditions	ready-to-use	1 min.
bactericidal in accordance with VAH - clean conditions	ready-to-use	1 min.
tuberculocidal EN14348 - clean conditions	ready-to-use	5 min.
yeasticidal in accordance with VAH - dirty conditions	ready-to-use	2 min.
yeasticidal EN16615 - clean conditions	ready-to-use	1 min.
yeasticidal in accordance with VAH - clean conditions	ready-to-use	2 min.
yeasticidal EN13624 - dirty conditions	ready-to-use	1 min.
virucidal against enveloped viruses EN14476 - dirty conditions	ready-to-use	15 sec.
limited spectrum virucidal activity EN14476 - dirty conditions	ready-to-use	15 min.
Norovirus EN14476 - dirty conditions	ready-to-use	1 min.
Norovirus EN14476 - clean conditions	ready-to-use	30 sec.
Polyoma SV40 in accordance with DVV (German Registered Association for Combating Viral Diseases	ready-to-use	15 sec.
Rotavirus EN14476 - clean conditions	ready-to-use	15 sec.

Certificates

VAH certificate
IHO listed

Product data

100 g solution contains the following active substances: 17,4 g Propan-2-ol, 12,47 g Ethanol (94 % w/w)
Labelling according to Regulation (EC) No. 648/2004: < 5% anionic surfactants

Chemical-physical data

Flash point:26 °C / Method : DIN 51755 Part 1

Form:liquid

Viscosity, dynamic:not determined

Density:ca. 0,95 g/cm3

Color:colourless

pH:3 - 3,6

Special advice

Use disinfectants safely. Always read the label and product information before use.
The product has very good material compatibility with metals and plastics. Keep away from heat and sources of ignition. Further information is available on request. The shelf-life of the opened container can be found on the packaging.

Instruction for use

Apply undiluted to the surface, wipe and allow taking effect. Ensure complete wetting and maintain the surface moist during the entire exposure time. Ensure that all visible dirt is removed before disinfection. Spray the surface from a distance of approx. 30 cm (approx. 40 ml/m²) and allow drying. For adenovirus and Mycobacterium tuberculosis, maintain the surface wet during the entire exposure time. For professional use only. Any serious incidents related to the product are to be reported to the manufacturer and competent authority. Not for final disinfection of semicritical and critical medical devices! The product can be used without gloves, provided that infection prevention and occupational safety allow this.

Information for order

Item	Delivery form	Item no.
mikrozid® universal liquid 5 l	1/Canister	on request
mikrozid® universal liquid 1 l spray bottle (RFL)	10/Carton	on request
mikrozid® universal liquid 1 l bottle (WSP)	10/Carton	on request
mikrozid universal liquid 750 ml FL	1/Carton	on request

These products are not available in every country. For more information please contact our local subsidiary or distributor.

Application aids

Item	Item no.
schülke dosing feeder 5 l / 10 l (20ml / stroke)	117101
Decanter funnel	117901
tap for 5 l / 10 l can	135502
Can key for 5 + 10 l	135810
measuring cup 500 ml	136101
FOAM Spray pump DIN 32	180123
Opener all-in-one (1l eurobottle/can/container)	70000804

Environmental information

schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining our high quality standards.

mikrozid^® universal liquid

Our Plus

Downloads