Fields of Application
Instructions for use
A typical cycle will be as follows:
- pre-rinsing (optional)
- cleaning with thermosept® ER, 5 ml/l
- intermediary rinse
- disinfection:
- dosage 1.0 % thermosept® PAA additive,, dosing while water inflow
- dosage 1.0 % thermosept® PAA base
- contact time 5 minutes at 37°C
- rinsing
- final rinsing
Certificates / Norms
0297Product data
Composition of component base:
100 g solution contains the following active substances: 5 g peracetic acid, as well as hydrogen peroxide and acetic acid
Composition of component additive:
100 g solution contains the following active substances: potassium hydroxide, phosphate and corrosion inhibitor, surfactant.
Special advice
For all the related safety information please refer to the Safety Data Sheet. To request the Safety Data Sheet please E-mail: tech-uk@schuelke.com
The base and additive components have to be used in combination.
Store in original container at room temperature. Keep the container tightly closed. protect from heat and sunlight. thermosept® PAA is not suitable for instruments made of brass and copper nor chrome-plated instruments.
According to EN 17 664, the instrument manufacturers' instructions should be followed and, if necessary, the compatibility of the materials ensured before the application.
This is particularly valid when reprocessing older endoscopes. These should be strictiy tested for compatibility with peracetic acid.
Information for order
| Item | Delivery form | Item | GTIN |
|---|---|---|---|
| thermosept PAA additive 5 l KA | 2 / carton(s) | 125802 | 4032651258024 |