gigazyme^® X·tra

Always read the label and product information before use.
For professional use only. Any serious incidents related to the product are to be reported to the manufacturer and competent authority. Keep container tightly closed. Store in the original container.
Medical lubricant gels (with or without local anesthetic effect) are often used during endoscopic examinations. When working solutions and concentrates of gigazyme^® X·tra come into contact with such gels, there is the possibility of precipitations. This reaction can occur in principle with all products containing cationic disinfectant agents. Every product mixture is therefore to be avoided, and gel residues should be thoroughly washed off. Please ask our customer service team about which lubricant gels are compatible.
Dosage:
depending on the degree of effectiveness 1 % - 2 %.
Application example:
1 litre of a 2 % working solution corresponds to 980 ml of water and 20 ml of gigazyme^® X•tra. Place endoscopes and instruments for reprocessing in the gigazyme^® X·tra solution immediately after use. Ensure complete covering of the surfaces, especially for hollow instruments. Allow to take effect until the medical devices are visually clean. After cleaning, rinse the medical devices thoroughly with water to remove all residues of the cleaning solution before disinfection. Use water of at least drinking water quality, preferably sterile distilled or fully deionised water. Please follow the reprocessing recommendations of the instrument manufacturers. Renew the working solution every workday and if there is visible contamination. Do not mix gigazyme^® X·tra with disinfectants and other cleaners. National regulations may require that cleaning and disinfection are carried out in two separate process steps. Not for final disinfection of semicritical and critical medical devices!