Fields of Application
Instructions for use
gigasept® pearls are dissolved in cold water (10 °C - 25 °C, at least drinking water quality) and diluted to the desired application concentration.
Dosage: 1.0 % - 2.0 %, depending on microbiological efficacy. The solution is prepared using the enclosed dosing aid. Clean off any visible contamination from instruments / medical devices before disinfection and then rinse, preferably with demineralised water.
Application example: 10 litres of a 2 % working solution corresponds to 9.8 litres of water and 200 g (200 g = 300 ml) of gigasept® pearls.
Add water and stir several times during the first 15 minutes after sprinkling in the appropriate amount of gigasept® pearls. After this activation time, the working solution is ready to use. Minor, undissolved residue does not affect the efficacy of the working solution, but is an additional activity deposit. Place instruments / medical devices in the working solution immediately after use. Ensure complete wetting, especially of hollow instruments / medical devices, and allow it to take effect. After reprocessing, rinse the instruments / medical devices thoroughly, preferably with demineralised water, to completely remove residue of the working solution.
The reprocessing recommendations of the respective instrument / medical device manufacturers must be complied with. Do not mix with cleaners or other disinfectants. National regulations may require that cleaning and disinfection are carried out in two separate process steps.
Standing time: Renew the working solution every work day and if there is visible contamination.
Certificates / Norms
0124Product data
Composition:
100 g of gigasept® pearls contain the following active substances: 43.0 g sodium percarbonate, 22.0 g tetraacetylethylenediamine.
Labelling according to Regulation (EC) No. 648/2004:
> 30 % oxygen-based bleach, < 5 % non-ionic surfactants, < 5 % phosphates,< 5 % EDTA, enzymes, perfumes.
Chemical-physical data
Special advice
Always read the label and product information before use.
gigasept® pearls are intended for use by professional personnel in the medical field, e.g. in clinics, private practices. All serious incidents related to the device shall be reported by the user / patient to the manufacturer and to the competent authority of the State in which the user / patient is established.
Do not use on instruments / medical devices with copper or brass surfaces or damaged chrome-plated and nickel-plated surfaces. Do not use for final disinfection of critical instruments / medical devices.
Carryover of small amounts of application solution from the precleaning is not expected to involve interactions with cleaning agents and disinfection agents from automated endoscope reprocessing (e.g. glutaraldehyde and peracetic acid base).
Slight color variations of the gigasept® pearls do not affect the product quality. The working solution can be disposed of via wastewater. Always close containers tightly and store in a dry and cool place, protected from light. Protect package contents from moisture.
Information for order
| Item | Delivery form | Item | GTIN |
|---|---|---|---|
| gigasept pearls 1,5 kg EM | 4 / carton(s) | 70004015 | 4064797029381 |
| gigasept pearls 6 kg EM | 1 / carton(s) | 70004016 | 4064797029398 |