perform^® sterile premium dry wipes

Apply disinfectant/cleaner on the wipe, then wipe objects and surfaces and allow to take effect. Ensure complete wetting.
The compatibility of the perform^® sterile premium dry wipes was tested with all sterile disinfectants of the perform^® range. Special attention was given to the chemical stability of the active ingredients of the disinfectants in the presence of the wipe material.
The following products of the perform^® range are compatible:

• perform^® sterile alcohol EP
• perform^® sterile aclohol IPA
• perform^® sterile PAA
• perform^® sterile concentrate PAA
• perform^® sterile concentrate OXY
• perform^® sterile concentrate Q2

Material: Polyester, double woven monofilament

Size: 30 x 30 cm

Thickness: 0,42 - 0,56 mm

Edges: Ultrasound-cut and sealed

Packaging: 10 wipes are single bagged. 10 of these units together are then additionally double bagged. One carton contains 3 of such bags with 100 wipes.

Sterility: by γ-irradiation

Surface mass: 130 g/m²

Particle release: LPC ( ≥ 0.5 µm): < 3 x 106 particle/m² (IEST-RP-CC 004.3 - orbital shake method) ; APC (Helmke Drum Test @10rpm); (≥ 0.5 µm): < 85 particle per wipes per m³ per hour (IES-RP-CC003.2)

Absorption (IEST-RP-CC 004.3): capacity: 340 ml/m² ; speed (method: drop dissapearance): < 1 second

Non-volatile residue (IEST-RP-CC 004.3, short extraction)*: Extraction with IPA (100 ml IPA, room temperature for 24 hours) 0.20 mg/g ; Extraction with DIW (100 ml DI water, room temperature for 24 hours) 0.10 mg/g

Ion content (IEST-RP-CC 004.3, short extraction)*: Chloride (Cl) 0.016 µg/g ; Sulphate (SO) 0.061 µg/g ; Ammonium (NH) 0.111 µg/g ; Calcium (Ca) 0.129 µg/g
*(typical test results; these are not part of the product specification)