perform^® sterile alcohol IPA (WFI)

• Annex 1 of EU Guide to Good Manufacturing practice: Manufacture of sterile medicinal products, March 2009.
• FDA Guidance for Industry: Sterile drug products produced by aseptic processing - current Good Manufacturing practice; U.S. Department of Health and Human Services, Food and Drug Administration, September 2004.

Apply perform^® sterile alcohol IPA WFI undiluted to objects and surfaces and allow to take effect. Clean the surface carefully before use. Remove excess water from the surface before disinfection, if appropriate. Do not apply more than 25 ml/m². Make sure to wet surfaces completely. Used wipes must be disposed in a closed container. Disinfection after each production and cleaning process or when required according to standard operating procedure (SOP). For professional use only. Application for PT 02: Disinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B). Effective against bacteria and yeasts.

Spraying: Spray ready-to-use product on the surface and allow to take effect at room temperature (20± 2°C) for at least 1 minute.
Wiping: Spray or pour ready-to-use product on the surface and wipe afterwards or wet a wipe with the ready-to-use product by spraying or pouring and thereafter wipe the surface. Allow to take effect for at least 5 minutes at room temperature (20± 2°C).

Composition:
100 g solution contains the following active substances: 63,1 g Propan-2-ol (equates 70% (v/v)).