perform^® sterile mix dry wipes

Apply disinfectant/cleaner on the wipe, then wipe objects and surfaces and allow to take effect. Ensure complete wetting.
The compatibility of the perform^® sterile mix dry wipes was tested with all sterile disinfectants of the perform^® range. Special attention was given to the chemical stability of the active ingredients of the disinfectants in the presence of the wipe material.
The following products of the perform^® range are compatible:

• perform^® sterile alcohol EP
• perform^® sterile alcohol IPA
• perform^® sterile PAA
• perform^® sterile concentrate PAA
• perform^® sterile concentrate OXY

Material: Nonwoven hydroentangled 55% cellulose and 45% polyester wipe

Size: 30 x 30 cm

Thickness: 0,27 - 0,34 mm

Packaging: 20 wipes are single bagged. 5 of these units together are then additionally double bagged. One carton contains 5 of such bags with 100 wipes.

Sterility: by γ-irradiation

Surface mass: 68 g/m²

Particle release: LPC (≥ 0.5 µm): < 12 x 107 particle/m² (IEST-RP-CC 004.3 - orbital shake method) ; APC (Helmke Drum Test @10rpm); (≥ 0.5 µm): < 340 particle per wipe per m³ per hour (IES-RP-CC003.2)

Absorption (IEST-RP-CC 004.3): capacity: 285 ml/m²

Speed (method: drop disappearance): 0.8 seconds

Non-volatile residues (IEST-RP-CC 004.3, short extraction)*: Extraction with DIW (100 ml DI water, room temperature for 24 hours) <0.2015 mg/g

Ion content (IEST-RP-CC 004.3, short extraction)*: Sodium (Na) <0.04 mg/g ; Potassium (K) <0.008 mg/g ; Chloride (Cl) <0.05 mg/g

*(typical test results, these are not part of the product specification)