antifect® N liquid

Alcohol-based, rapid disinfection of non-invasive medical devices and surfaces.

Our Plus

  • broad efficacy within very short time
  • leaves no streaks
  • ready to use

Downloads

Fields of Application

The product is suitable for disinfecting medical devices and surfaces. The rapid disinfectant product is suitable for disinfecting near-patient surfaces with an increased risk of infection that require short exposure times.

Instructions for use

Apply undiluted to the surface, wipe and allow taking effect. Ensure complete wetting and maintain the surface moist during the entire exposure time. Ensure that all visible dirt is removed before disinfection. Maximum yield of 50 ml/m². For professional use only. Any serious incidents related to the product are to be reported to the manufacturer and competent authority. Not for final disinfection of semicritical and critical medical devices!

Microbiological efficacy

EfficacyConcentrationContact time
bactericidal
EN13727, EN16615
- dirty conditions
ready-to-use1 min.
bactericidal
in accordance with VAH Guidelines with short contact times
ready-to-use1 min.
tuberculocidal
EN14348
- dirty conditions
ready-to-use1 min.
yeasticidal
in accordance with VAH Guidelines with short contact times
ready-to-use1 min.
yeasticidal
EN13624, EN16615
- dirty conditions
ready-to-use1 min.
virucidal against enveloped viruses
EN14476
- dirty conditions
ready-to-use30 sec.
limited spectrum virucidal activity
EN14476
- dirty conditions
ready-to-use30 sec.
Polyoma SV40
in accordance with DVV (German Registered Association for Combating Viral Diseases
ready-to-use5 min.

Certificates

  • IHO listed
  • VAH certificate

Product data

Ingredients:
100 g solution contains the following active substances:
24,75 g Ethanol (94 %), 35 g Propan-1-ol

Chemical-physical data

Flash point:27 °C / Method : DIN 51755 Part 1
Color:colourless
Density:0,890 g/cm3 / 20 °C
Form:liquid
pH:approx. 7 / 20 °C

Special advice

Use disinfectants safely. Always read the label and product information before use.
The product has good material compatibility with metals and plastics (except acrylic glass and alcohol-sensitive paints).
Surfaces that are particularly sensitive to alcohol, such as acrylic glass, must not be treated. When using alcoholic disinfectants, please observe the fire and explosion protection in accordance with the trade association regulation "Disinfection Work in Health Care". Keep away from heat and sources of ignition. Wearing protective gloves is advised. Further information is available on request. The shelf-life of the opened container can be found on the packaging.

Information for order

ItemDelivery formItem no.
antifect® N liquid 500 ml bottle20/Cartonon request
antifect® N liquid 1 l bottle10/Cartonon request
antifect® N liquid 5 l1/Canisteron request
These products are not available in every country. For more information please contact our local subsidiary or distributor.

Application aids

ItemItem no.
schülke dosing feeder 5 l / 10 l (20ml / stroke)117101
Decanter funnel117901
Compressed-air nozzle120001
wall bracket plastics 500ml134411
Bed bracket for square bottle 500 ml (straight)134412
Bed bracket for square bottle 1 l (straight)134413
Bed bracket for 500 ml square bottle (curved)134414
Bed bracket for 1 l square bottle (curved)134415
wall bracket plastics 1l134416
schülke tap for 5 l / 10 l can135501
Can key for 5 + 10 l135810
measuring cup 50 ml136102
trigger-sprayer for 500 /1000 ml180124
Opener all-in-one (1l eurobottle/can/container)70000804

Environmental information

schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining our high quality standards.
EuroNormCE 0297

Privacy Policy

We use analysis methods (e. g. cookies) to measure how often our site is visited and how it is used. In addition, we use cookies to link your page visits and website use with your customer data stored in our CRM system in order to be able to address you individually, i.e. based on interests and usage. We embed third-party content from other providers (e. g. videos) on our site. We have no influence on further data processing and any tracking by the third party provider. In this context, we also use service providers in third countries outside the EU that may not have an adequate level of data protection, which harbors the following risks: Access by authorities without informing the data subject, no data subject rights, no legal remedies, loss of control.
With your settings you consent to the processes described above. You can revoke your consent with effect for the future. You can find more information in our privacy policy.