terralin® protect

Fields of Application

The product is suitable for disinfecting surfaces and medical devices. As a long-established product, it is used in all hospital areas and can be combined with schülke s&m cleaning additive and schülke s&m care additive. As this product contains cationic active ingredients, the combination with cleaning agents, cleaning additives or wipe care products can affect the microbiological effectiveness and cause problems during application. schülke should therefore be consulted before attempting mixing the products.

Instructions for use

Prepare the working solution in the desired concentration. Wet clean surfaces, e.g. floors and other wipeable surfaces. Ensure complete wetting of the surfaces. Ensure that all visible dirt is removed before disinfection. Allows dosing via centralized and decentralized dosing devices. schülke dosing aids can be used for dosing. After completing the work, dispose of the working solution and clean the equipment thoroughly with water. Depending on the type of floor, additional care may be useful. For professional use only. Any serious incidents related to the product are to be reported to the manufacturer and competent authority. Not for final disinfection of semicritical and critical medical devices!

Microbiological efficacy

Efficacy	Concentration	Contact time
bactericidal EN13727, EN16615 - dirty conditions	0.5 % (5 ml/l)	60 min.
tuberculocidal EN14348 - clean conditions	2 % (20 ml/l)	240 min.
yeasticidal EN13624, EN16615 - dirty conditions	0.5 % (5 ml/l)	60 min.
virucidal against enveloped viruses EN14476 - dirty conditions	0.5 % (5 ml/l)	15 min.
limited spectrum virucidal activity EN14476 - clean conditions	1 % (10 ml/l)	240 min.
Norovirus (MNV) EN14476 - clean conditions	1 % (10 ml/l)	240 min.
Norovirus (MNV) EN14476 - clean conditions	2 % (20 ml/l)	120 min.
Polyoma SV40 in accordance with DVV (German Registered Association for Combating Viral Diseases	2 % (20 ml/l)	120 min.
Rotavirus EN14476 - clean conditions	0.5 % (5 ml/l)	60 min.

Certificates

VAH certificate
IHO listed

Product data

Composition:
100 g solution contains the following active substances:
22 g Alkyl (C12-16) dimethylbenzyl ammonium chloride (ADBAC/BKC (C12-C16)), 17 g 2-Phenoxyethanol, 0.9 g Amines, N-C12-C14 (even numbered)-alkyltrimethylenedi-, reaction products with chloroacetic acid)
Labelling according to Regulation (EC) No. 648/2004:
5 - 15 % non-ionic surfactants, perfumes

Chemical-physical data

Form:liquid

Viscosity, dynamic:ca. 21 mPa*s / 20 °C / Method : ISO 3219

Color:green

Flash point:48 °C / Method : DIN 51755 Part 1

Density:ca. 1,01 g/cm3 / 20 °C

pH:8,6 / 100 % / 20 °C

Special advice

Use disinfectants safely. Always read the label and product information before use.
Wearing protective gloves is advised. Protect from direct sunlight and heat. Recommended storage temperature 5-25°C For further information on safe handling and storage conditions, please refer to the safety data sheet. The shelf-life of the opened container can be found on the packaging.

Information for order

Item	Delivery form	Item no.
terralin® protect 2 l bottle	5/Carton	on request
terralin® protect 5 l	1/Canister	on request
terralin® protect 20 l	1/Canister	on request

These products are not available in every country. For more information please contact our local subsidiary or distributor.

Application aids

Item	Item no.
schülke dosing feeder 5 l / 10 l (20ml / stroke)	117101
Decanter funnel	117901
tap for 20/ 25 lt can	126101
schülke tap for 5 l / 10 l can	135501
Can key for 5 + 10 l	135810
Can key for 20 + 25 l	135901
measuring cup 500 ml	136101
schülke dosing feeder 20 l / 25 l (20ml / stroke)	182501
Opener all-in-one (1l eurobottle/can/container)	70000804

Environmental information

schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining our high quality standards.

terralin^® protect

Our Plus

Downloads