Fields of Application
quartacid® plus has, in addition to its disinfecting action, excellent cleaning properties. It is suitable for cleaning and disinfecting surfaces in one single operation in:
- All areas where food is processed and/or prepared
- The pharmaceutical industry
- The cosmetics industry
Instructions for use
Cleaning and disinfection in one step.
Heavily contaminated surfaces are to be pre-cleaned e.g. with an alkaline foam cleaner.
Prepare working solution in desired concentration.
Apply the application solution by wiping or immersion or low pressure systems. Ensure complete wetting.
At the end of the recommended contact time surfaces with food contact should be rinsed evenly with an adequate quantity of water of drinking water quality.
Product data
Composition:
100 g solution contains the following active substances: 15.4 g Didecyldimethylammonium chloride
Labelling according to Regulation (EC) No. 648/2004: < 5% non-ionic surfactants
Chemical-physical data
Color
nearly colourless
Density
approx. 1,01 g/cm3 / 20 °C
Flash point
39 °C / Method: ISO 2719
Form
liquid
pH
approx. 1,4
Viscosity, dynamic
approx. 18 mPa*s / Method: ISO 3219
Odor
characteristic
Special advice
Use disinfectants safely. Always read the label and product information before use.
Do not inhale the aerosol.
Environmental information
schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining our high quality standards.