Fields of Application
Instructions for use
Vaporise perform® select soproper® undiluted. Quantities and times are to be validated on site. Surfaces should be precleaned. Please follow isolator or material transfer chambers manufacturer's instructions. Microbiological effectiveness is extremely comprehensive (incl. spores). Input quantities, use contact times and ventilation times are to be ascertained on site. Automatic spraying: Prepare the working solution into a bucket, by adding the required quantity of the concentrate into drinking water and stir gently. Spray the working solution automatically on pre-cleaned surfaces and allow to take effect.
Product data
Composition:
100 g solution contains the following active substances: 3.6 g Peracetic Acid
Chemical-physical data
Special advice
Use biocidal products safely. Always read the label and product information before use. For professional use only. Read SDS before use.
Compatibility:
Good material compatibility with stainless steel, IIR, PVC soft, SI, PEHD, glass, etc. Contact with non-ferrous metals (brass,copper) should be avoided. Please ensure compatibility of materials and instruments with peracetic acid.
Storage and disposal:
Store and use only in well-ventilated areas. Do not mix with other products. Do not use after expiry date. Always close canistertightly after removal of product. Canister with venting cap. Do not keep the venting cap sealed. Store in upright position only.Store at ambient temperature in the original canister. Protect from heat and sunlight. Do not store with alkaline products. Neverreturn used product into the original canister. Only recycle completely emptied packaging. Do not reuse empty container. Dispose ofthe product including packaging as hazardous waste in compliance with local and national regulations.