Fields of Application
thermosept® X·tra enzymatic cleaner is intended for thermal reprocessing in washer-disinfectors (WD) and container washers. The product is compatible with the disinfection components thermosept® ED (glutaraldehyde-based) and thermosept® PAA (peracetic acid-based) for chemothermal reprocessing in automated endoscope reprocessors (AER).
The outstanding cleaning performance is based on the combination of an innovative system of detergents combined with high-performance enzymes.
Even at low doses, thermosept® X·tra enzymatic cleaner removes organic contaminants such as blood, proteins, tissue residues as well as mucus and fatty impurities.
The synergistic combination of active ingredients allow excellent compatibility with materials, even with sensitive materials such as anodized aluminum and non-ferrous metal.
With a pH-value of >10, a ten-minute cleaning time and an elevated, non-protein-fixing process temperature during the cleaning phase, thermosept® X·tra enzymatic cleaner contributes to risk reduction with regard to vCJK according to the German RKI recommendation.
Instructions for use
Dosage:
Standard concentration: 0.5 % (5 mL/L).
Depending on the degree of soiling: 0.3 - 1.0 % (3 - 10 mL/L).
For the reprocessing of endoscopes: 35 °C - 55 °C, 3 - 10 min.
For the reprocessing of surgical instruments: 40 °C - 60 °C, 5 - 10 min.
The dosing, cleaning time and temperature are depending on the intensity of soiling and the type of wash ware. The dosing is performed by machine-integrated dosing pumps.
Do not mix up the concentrate with other chemicals. The use of deionized water is recommended.
Please note recommendations of machine and instrument manufacturers.
Certificates / Norms
Product data
Composition: Anionic and nonionic surfactants, enzymes, solubilisers and corrosion inhibitors.
Chemical-physical data
Densitiy: approx.1,06 g/cm3 / 20 °C / 1.013 hPa
Color: yellow
Flash point: > 102 °C / Methode : ISO 3679
Form: liquid
pH: ca. 10,7 / 100 % / 20 °C
Viscosity, dynamic: ca. 4 mPa*s / Method : ISO 3219
Special advice
Always read the label and product information before use.
For professional use only.
Any serious incidents related to the product are to be reported to the manufacturer and competent authority.
The neutralisation step required for classical alkaline cleaning agents is not necessary. When preparing ocular instruments, two interim rinsing steps with purified water before thermal disinfection are recommended or use neutraliser thermosept® NKZ. Please note recommendations of machine and instrument manufacturers.
Keep container tightly closed. Protect from frost, heat and sunlight. Store at room temperature in the original container (Storage temperature: 5 - 25 °C).
Information for order
| Item | Delivery form | Item |
|---|---|---|
| thermosept X·tra enz.cleaner BHT Pin 5 l KA | 1 / canister(s) | on request |
| thermosept X·tra enz.cleaner 20 l KA | 1 / canister(s) | on request |
| thermosept X·tra enz.cleaner 5 l KA | 1 / canister(s) | on request |
| thermosept X·tra enz.cleaner 10 l KA | 1 / canister(s) | on request |
| thermosept X·tra enz.cleaner 200 l FA | 1 / drum(s) | on request |
| thermosept X·tra enz.cleaner 500 l EC | 1 / container(s) | on request |